JSW Plastics Machinery Inc. Home Molding Machine Training Program Market Place Contact Us About Us Site Map




Our on-sale products offer reliability, dependability, and superb customer service in a whole bundle with the lowest price possible!
Contact Us
master@jswpmi.com

Large Size Electric Servo Drive Injection Molding Machine
J610ELIII

Specifications

Item Model
J610ELIII
1400H 2300H 3100H
Injection Unit Screw code K (OP) A B A B A B
Screw diameter in
2.60 2.99 3.31 3.31 3.62 3.62 3.94
Screw stroke in
11.811 16.535 18.111
Injection capacity (Theoretical) in3
62.6 83.1 101.5 142.1 170.1 186.6 220.5
Injection capacity [GP-PS] oz
32.9 43.7 53.4 74.7 89.6 98.2 116.0
Injection pressure (Max.) psi
34900 26300 21600 27500 22900 26800 22600
Holding pressure (Max.) psi
31300 23600 19400 24800 20500 24200 20300
Injection speed in/sec
6.30 6.30 6.30
Injection rate in3/sec
33.4 44.3 54.1 54.1 64.9 64.9 76.7
Plasticizing rate (GP-PS) oz/sec
2.32 3.31 4.10 3.43 4.61 4.61 5.68
Screw speed rpm
210 165 165
Nozzle touch force US ton
4.4 6.6 6.6
Nozzle stroke from platen in
2.0 2.0 2.0
Type of nozzle  
Open nozzle Open nozzle Open nozzle
"PID" barrel temperature control  
Barrel 4, nozzle 1 Barrel 4,
nozzle 1		 Barrel 4,
nozzle 1
Barrel heater capacity kw
34.9 40.0 45.2
Clamping Unit
Mechanism  
Double toggle
Clamping force US ton
607
Maximum daylight opening in
66.930
Opening stroke [Max.] in
35.43
Mold height in
15.748~31.497
Distance between tie-bars [HXV] in
35.4 X 35.4
Platen size [HXV] in
52.0 X 52.0
Ejector type  
21 Points
Ejector force US ton
13.3
Ejector stroke in
7.087
Machine
Dimensions
and General
Machine weight US ton
35.3 39.7 40.8
Machine dimensions [LXWXH] ft
29.40 X 6.92
X 7.84		 31.79 X 6.92 X 8.73 32.38 X 6.92 X 8.73

Remarks:

  1. Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.
  2. The theoretical injection capacity is (cross sectional area of cylinder) X (stroking distance of screw.)
  3. The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.
  4. The Plasticizing rate is applicable for GP-PS.
  5. The total power draw is based on full load condition. Actual power draw should be less than half of above

Notes:

  • Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.
  • Performance specifications are based on theoretical data.
  • Molding Condition: Holding pressure is 80% and total cycle time is 100 second.
  • Due to continual improvements, specifications are subject to change without notice.
 
(C) 2002 JSW Plastics Machinery Inc.