JSW Plastics Machinery Inc. Home Molding Machine Training Program Market Place Contact Us About Us Site Map




Our on-sale products offer reliability, dependability, and superb customer service in a whole bundle with the lowest price possible!
Contact Us
master@jswpmi.com

Small & Medium Size Electric Servo Drive Injection Molding Machine
J245ELIII

Specifications

Item Model
J245ELIII
Injection Unit Screw code K (OP) A B
Screw diameter in
1.81 2.09 2.28
Screw stroke in
8.268
Injection capacity (Theoretical) in3
21.3 28.4 33.7
Injection capacity [GP-PS] oz
11.2 14.8 17.8
Standard
Injection pressure (Max.) psi
31300 25600 20000
Holding pressure (Max.) psi
27100 22700 17800
Injection rate in3/sec
16.2 21.6 25.7
Injection speed in/sec
6.30
Plasticizing rate (GP-PS) oz/sec
1.12 1.59 1.93
Screw speed rpm
250
High speed (OP)
Injection pressure (Max.) psi
31300 25600 20000
Holding pressure (Max.) psi
27100 22700 17800
Injection rate in3/sec
24.2 32.2 38.4
Injection speed in/sec
9.45
Plasticizing rate (GP-PS) oz/sec
1.57 2.23 2.69
Screw speed rpm
350
Nozzle touch force US ton
2.8
Nozzle stroke from platen in
2.0
Type of nozzle  
Open nozzle
Cylinder temperature control  
Cylinder 4, nozzle 1
Heater wattage kW
18.2
Clamping Unit
Mechanism  
Double toggle
Clamping force US ton
242
Maximum daylight opening in
41.335
Opening stroke [Max.] in
21.65
Mold height in
9.055~19.685
Distance between tie-bars [HXV] in
23.2 X 23.2
Platen size [HXV] in
34.3 X 34.3
Ejector type  
9 Points
Ejector force US ton
4.97
Ejector stroke in
5.118
Machine Dimensions and General
Machine weight US ton
12.9
Machine dimensions [LXWXH] ft
20.54 X 5.05 X 7.11
Hopper capacity ft3
1.77

Remarks:

  1. Injection pressure of J-ELIII series is different from that of JSW's hydraulic machines.
  2. "K K" size screw smaller than J200ELIII is same as "K K" size of one smaller model.
  3. Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.
  4. The theoretical injection capacity is (cross sectional area of cylinder) X (stroke of screw.)
  5. The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.
  6. The Plasticizing rate is applicable for GP-PS.
  7. PC (polycarbonate), HPVC, other engineering plastic, etc., low temperature setting, and high speed molding, may require a high torque depending on the grade or molding conditions. Please contact us for more information.

Notes:

  • Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.
  • Performance specifications are based on theoretical data.
  • Due to continual improvements, specifications are subject to change without notice.
 
(C) 2002 JSW Plastics Machinery Inc.