JSW Plastics Machinery Inc. Home Molding Machine Training Program Market Place Contact Us About Us Site Map




Our on-sale products offer reliability, dependability, and superb customer service in a whole bundle with the lowest price possible!
Contact Us
master@jswpmi.com

Medium Size Injection Molding Machine
J385EIII

Specifications

Item Grade
J385EIII
Injection Unit Screw cylinder type A B C
Screw diameter in
2.60 2.83 3.39
Injection pressure (Max.) psi
26100 21900 15300
Theoretical injection capacity in3
54.3 64.7 92.1
Injection capacity [GP-PS] oz
28.6 34.0 48.5
Injection rate in3/sec
20.9 24.8 35.5
Plasticizing rate [GP-PS] oz/sec
2.21 2.65 3.33
Screw speeds High torque [Max.] rpm
Low torque [Max.] rpm
155
200
Screw stroke in
10.236
Nozzle stroke from platen in
2.0
Type of nozzle  
Open nozzle
Cylinder temperature control  
Cylinder 4, nozzle 1
Clamping Unit
Mechanism  
Double toggle
Clamping force US ton
386
Daylight opening [Max.] in
53.938
Opening stroke [Max.] in
27.56
Mold height in
12.599~26.378
Distance between tie-bars [HXV] in
28.7 X 28.7
Platen size [HXV] in
40.7 X 40.7
Hydraulic ejector  
Cross line [17 points]
Ejector force / stroke US ton/in
12.14/ 5.906
Mold closing / opening speeds ft/min
171-148
Electrical Equipment
Pump driving motor HP
60
Heater wattage kW
24.5
Mold height adjusting motor HP
2
Total power capacity kW
70.5
Machine Dimensions and General
Machine weight US ton
19.3
Machine dimensions [LXWXH] ft
25.26 X 5.54 X 7.36
Hydraulic oil reservoir US gal
158.4
Hopper capacity ft3
4.39

Remarks:

  1. The theoretical injection capacity is cross sectional area of cylinder X stroke of screw.
  2. The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.
  3. The plasticizing rate is applicable for GP-PS.
  4. The total power capacity does not include power for the mold height adjusting motor (as it is not used while the machine is operated).
  5. PC (polycarbonate), HPVC, engineering plastic, etc., low temperature setting, and high speed molding, may require a high torque depending on the grade or molding conditions. Please contact us for more information.

Notes:

  • Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.
  • Performance specifications are based on theoretical data.
  • Due to continual improvements, specifications are subject to change without notice.
 
(C) 2002 JSW Plastics Machinery Inc.