JSW Plastics Machinery Inc. Home Molding Machine Training Program Market Place Contact Us About Us Site Map




Our on-sale products offer reliability, dependability, and superb customer service in a whole bundle with the lowest price possible!
Contact Us
master@jswpmi.com

Large Size Injection Molding Machine
J1450EIII

Specifications

Item Grade
5000H 6600H
Injection Unit Screw cylinder type A B A B
Screw diameter in
4.33 4.72 4.72 5.12
Injection pressure [Max.] psi
24500 20500 24200 20700
Theoretical injection capacity in3
307.2 365.6 400.1 469.5
Injection capacity [GP-PS] oz
161.6 192.3 210.4 247.0
Injection rate in3/sec
51.8 61.6 52.2 61.2
Plasticizing rate [GP-PS] oz/sec
5.68 5.19 5.59 5.78
Screw speeds High torque [Max.] rpm
Low torque [Max.] rpm
70 / 90 60 / 70
140 90
Screw stroke in
20.867 22.835
Nozzle stroke from platen in
2.0
Type of nozzle  
Open nozzle
Cylinder temperature control  
Cylinder 4, nozzle 1
Clamping Unit
Mechanism  
Double toggle
Clamping force US ton
1438
Daylight opening [Max.] in
110.242
Opening stroke [Max.] in
59.06
Mold height in
25.591~51.182
Distance between tie-bars [HXV] in
51.8X50.0
Platen size [HXV] in
75.4X74.4
Hydraulic ejector  
Cross line [25 points]
Ejector force / stroke US ton/in
39.79 / 9.843
Mold closing / opening speeds ft/min
141-154
Electrical Equipment
Pump driving motor HP
141
Heater wattage kW
43.15 48.45
Mold height adjusting motor HP
10
Total power capacity kW
150 155
Machine Dimensions and General
Machine weight US ton
73.7 74.8
Machine dimensions [LXWXH] ft
41.2X9.5X9.4 42.6X9.5X10.0
Hydraulic oil reservoir US gal
449.1
Hopper capacity ft3
6.0 12.0

Remarks:

  1. The theoretical injection capacity is cross sectional area of cylinder X stroke of screw.
  2. The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.
  3. The plasticizing rate is applicable for GP-PS.
  4. The total power capacity does not include power for the mold height adjusting motor (as it is not used while the machine is operated).
  5. PC (polycarbonate), HPVC, engineering plastic, etc., low temperature setting, and high speed molding, may require a high torque depending on the grade or molding conditions. Please contact us for more information.

Notes:

  • Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.
  • Performance specifications are based on theoretical data.
  • Due to continual improvements, specifications are subject to change without notice.
 
(C) 2002 JSW Plastics Machinery Inc.